From inspec@zetnet.co.uk Fri Dec 20 18:31:36 1996 Path: uunet!bounce-back From: Paul Clarke Newsgroups: news.announce.newgroups,news.groups,sci.engr.safety Subject: RFD: misc.industry.safety.personal moderated Followup-To: news.groups Date: 20 Dec 1996 23:31:34 -0000 Organization: . Lines: 95 Sender: tale@uunet.uu.net Approved: newgroups-request@uunet.uu.net Message-ID: <851124693.3664@uunet.uu.net> NNTP-Posting-Host: rodan.uu.net Archive-Name: misc.industry.safety.personal Xref: uunet news.announce.newgroups:9457 news.groups:244391 sci.engr.safety:4976 REQUEST FOR DISCUSSION (RFD) moderated group misc.industry.safety.personal This is a formal Request For Discussion (RFD) for the creation of a world-wide moderated Usenet newsgroup misc.industry.safety.personal. This is not a Call for Votes (CFV); you cannot vote at this time. Procedural details are below. Newsgroup line: misc.industry.safety.personal Personal Protective Equipment. (Moderated) RATIONALE: misc.industry.safety.personal At present there is no newsgroup dedicated to the personal protective equipment (ppe) industry. This new group will provide the opportunity for interested parties (as set out in the charter) to discuss matters of mutual interest. Existing fora for ppe - eg National, Regional and International standards bodies, manufacturers' associations etc - do not facilitate discussions over a broad front. They are usually confined to, respectively - consideration of the product standards or manufacturer (only) interests. This newsgroup will enable discussions over a much wider range of topics. Furthermore, relevant Regional product standards - eg European, American, Australian / New Zealand - currently differ. It is to be hoped that world-wide discussion between group members may act as an informal catalyst to bring together these differing standards in the future, as well as providing the forum for useful dialogue in the meantime. It is intended to maintain only one main group, and not to divide it into sub-groups specialising in particular topics. In this way, the maximum cross fertilisation of ideas will be maintained. CHARTER: misc.industry.safety.personal For discussion of all aspects of personal protective equipment (ppe), defined as any device(s) worn or held by the user in order to provide him (her) protection whilst performing the given task. It is open especially, but not exclusively, to manufacturers, distributors, testing and certifying organisations, government departments, safety officers and users of ppe, including professional associations of the foregoing. Advertising of products and services directly related to ppe is allowed, but is limited to 50 words of text in any posting, plus references to contact details, addresses, websites etc. Binaries are not permitted. The group will be moderated, in order to prevent articles not conforming to the charter from being posted. END CHARTER. MODERATOR INFO: misc.industry.safety.personal Moderator: Paul Clarke Paul Clarke is a chartered mechanical engineer, 49 years old and living in England. He has been involved with the ppe industry for 22 years. END MODERATOR INFO. PROCEDURE: This is a request for discussion, not a call for votes. In this phase of the process, any potential problems with the proposed newsgroups should be raised and resolved. The discussion period will continue for a minimum of 21 days (starting from when the first RFD for this proposal is posted to news.announce.newgroups), after which a Call For Votes (CFV) may be posted by a neutral vote taker if the discussion warrants it. Please do not attempt to vote until this happens. All discussion of this proposal should be posted to news.groups. This RFD attempts to comply fully with the Usenet newsgroup creation guidelines outlined in "How to Create a New Usenet Newsgroup" and "How to Format and Submit a New Group Proposal". Please refer to these documents (available in news.announce.newgroups) if you have any questions about the process. DISTRIBUTION: news.announce.newgroups,news.groups,sci.engr.safety ------------------------------------------------------------------- Proponent:Paul Clarke at inspec@zetnet.co.uk From jjd@primenet.com Tue Feb 18 14:28:05 1997 Path: news.isc.org!bounce-back From: jjd@primenet.com (Jim Davis) Newsgroups: news.announce.newgroups,news.groups,sci.engr.safety Subject: CFV: misc.industry.safety.personal moderated Followup-To: poster Message-ID: <856304492.29603@isc.org> Organization: Usenet Volunteer Votetakers Approved: newgroups-request@isc.org Expires: 12 Mar 1997 00:00:00 GMT Archive-Name: misc.industry.safety.personal Date: Tue, 18 Feb 1997 22:21:32 GMT Lines: 116 Xref: news.isc.org news.announce.newgroups:53 FIRST CALL FOR VOTES (of 2) moderated group misc.industry.safety.personal Newsgroup line: misc.industry.safety.personal Personal protective equipment. (Moderated) Votes must be received by 23:59:59 UTC, 11 Mar 1997. This vote is being conducted by a neutral third party. Direct questions about the proposed group to the proponent. Proponent: Paul Clarke Votetaker: Jim Davis RATIONALE: misc.industry.safety.personal At present there is no newsgroup dedicated to the personal protective equipment (ppe) industry. This new group will provide the opportunity for interested parties (as set out in the charter) to discuss matters of mutual interest. Existing fora for ppe - eg National, Regional and International standards bodies, manufacturers' associations etc - do not facilitate discussions over a broad front. They are usually confined to, respectively - consideration of the product standards or manufacturer (only) interests. This newsgroup will enable discussions over a much wider range of topics. Furthermore, relevant Regional product standards - eg European, American, Australian / New Zealand - currently differ. It is to be hoped that world-wide discussion between group members may act as an informal catalyst to bring together these differing standards in the future, as well as providing the forum for useful dialogue in the meantime. It is intended to maintain only one main group, and not to divide it into sub-groups specialising in particular topics. In this way, the maximum cross fertilisation of ideas will be maintained. CHARTER: misc.industry.safety.personal For discussion of all aspects of personal protective equipment (ppe), defined as any device(s) worn or held by the user in order to provide him (her) protection whilst performing the given task. It is open especially, but not exclusively, to manufacturers, distributors, testing and certifying organisations, government departments, safety officers and users of ppe, including professional associations of the foregoing. Advertising of products and services directly related to ppe is allowed, but is limited to 50 words of text in any posting, plus references to contact details, addresses, websites etc. Binaries are not permitted. The group will be moderated, in order to prevent articles not conforming to the charter from being posted. END CHARTER. MODERATOR INFO: misc.industry.safety.personal Moderator: Paul Clarke Administrative contact address: inspec@zetnet.co.uk Article submission address: inspec@zetnet.co.uk Paul Clarke is a chartered mechanical engineer, 49 years old and living in England. He has been involved with the ppe industry for 22 years. END MODERATOR INFO. HOW TO VOTE: Send email to: jjd@primenet.com Your email message should contain one and only one of the following statements: I vote YES on misc.industry.safety.personal I vote NO on misc.industry.safety.personal You may also vote ABSTAIN or CANCEL. ABSTAIN does not affect the final vote count in any way but is listed in the final voting results. CANCEL removes any earlier vote and is not listed in the final voting results. VOTING PROCEDURE NOTES: Standard Guidelines for voting apply. One account per person and one vote per person. Votes must be mailed directly from the voter to the votetaker. Anonymous, forwarded or proxy votes are not valid; this includes votes generated by WWW/HTML/CGI forms. Vote counting is automated: If you don't follow these directions then your vote may not get counted. If you do not receive an acknowledgment of your vote within several days, contact the votetaker about the problem. It's your responsibility to make sure that your vote is registered correctly. Duplicate votes are resolved in favor of the most recent valid vote. Addresses and votes of all voters will be published in the final voting results post. The purpose of a Usenet vote is to determine the genuine interest in people who would read a proposed newsgroup. Soliciting votes from disinterested people defeats this purpose. Please do not redistribute this CFV. If you must, direct people to the official CFV as posted to news.announce.newgroups. Distributing pre-marked or otherwise edited copies of this CFV will result in those votes being cancelled. When in doubt, ask the votetaker. DISTRIBUTION: This CFV has been crossposted to sci.engr.safety From jjd@primenet.com Sat Mar 1 12:04:41 1997 Path: news.isc.org!bounce-back From: jjd@primenet.com (Jim Davis) Newsgroups: news.announce.newgroups,news.groups,sci.engr.safety Subject: 2nd CFV: misc.industry.safety.personal moderated Followup-To: poster Message-ID: <857245616.28368@isc.org> Supersedes: <856304492.29603@isc.org> Organization: Usenet Volunteer Votetakers, Ska Revival branch. Approved: newgroups-request@isc.org Expires: 12 Mar 1997 00:00:00 GMT Archive-Name: misc.industry.safety.personal Date: Sat, 01 Mar 1997 19:46:56 GMT Lines: 116 Xref: news.isc.org news.announce.newgroups:127 LAST CALL FOR VOTES (of 2) moderated group misc.industry.safety.personal Newsgroup line: misc.industry.safety.personal Personal protective equipment. (Moderated) Votes must be received by 23:59:59 UTC, 11 Mar 1997. This vote is being conducted by a neutral third party. Direct questions about the proposed group to the proponent. Proponent: Paul Clarke Votetaker: Jim Davis RATIONALE: misc.industry.safety.personal At present there is no newsgroup dedicated to the personal protective equipment (ppe) industry. This new group will provide the opportunity for interested parties (as set out in the charter) to discuss matters of mutual interest. Existing fora for ppe - eg National, Regional and International standards bodies, manufacturers' associations etc - do not facilitate discussions over a broad front. They are usually confined to, respectively - consideration of the product standards or manufacturer (only) interests. This newsgroup will enable discussions over a much wider range of topics. Furthermore, relevant Regional product standards - eg European, American, Australian / New Zealand - currently differ. It is to be hoped that world-wide discussion between group members may act as an informal catalyst to bring together these differing standards in the future, as well as providing the forum for useful dialogue in the meantime. It is intended to maintain only one main group, and not to divide it into sub-groups specialising in particular topics. In this way, the maximum cross fertilisation of ideas will be maintained. CHARTER: misc.industry.safety.personal For discussion of all aspects of personal protective equipment (ppe), defined as any device(s) worn or held by the user in order to provide him (her) protection whilst performing the given task. It is open especially, but not exclusively, to manufacturers, distributors, testing and certifying organisations, government departments, safety officers and users of ppe, including professional associations of the foregoing. Advertising of products and services directly related to ppe is allowed, but is limited to 50 words of text in any posting, plus references to contact details, addresses, websites etc. Binaries are not permitted. The group will be moderated, in order to prevent articles not conforming to the charter from being posted. END CHARTER. MODERATOR INFO: misc.industry.safety.personal Moderator: Paul Clarke Administrative contact address: inspec@zetnet.co.uk Article submission address: inspec@zetnet.co.uk Paul Clarke is a chartered mechanical engineer, 49 years old and living in England. He has been involved with the ppe industry for 22 years. END MODERATOR INFO. HOW TO VOTE: Send email to: jjd@primenet.com Your email message should contain one and only one of the following statements: I vote YES on misc.industry.safety.personal I vote NO on misc.industry.safety.personal You may also vote ABSTAIN or CANCEL. ABSTAIN does not affect the final vote count in any way but is listed in the final voting results. CANCEL removes any earlier vote and is not listed in the final voting results. VOTING PROCEDURE NOTES: Standard Guidelines for voting apply. One account per person and one vote per person. Votes must be mailed directly from the voter to the votetaker. Anonymous, forwarded or proxy votes are not valid; this includes votes generated by WWW/HTML/CGI forms. Vote counting is automated: If you don't follow these directions then your vote may not get counted. If you do not receive an acknowledgment of your vote within several days, contact the votetaker about the problem. It's your responsibility to make sure that your vote is registered correctly. Duplicate votes are resolved in favor of the most recent valid vote. Addresses and votes of all voters will be published in the final voting results post. The purpose of a Usenet vote is to determine the genuine interest in people who would read a proposed newsgroup. Soliciting votes from disinterested people defeats this purpose. Please do not redistribute this CFV. If you must, direct people to the official CFV as posted to news.announce.newgroups. Distributing pre-marked or otherwise edited copies of this CFV will result in those votes being cancelled. When in doubt, ask the votetaker. DISTRIBUTION: This CFV has been crossposted to sci.engr.safety From jjd@primenet.com Tue Mar 11 17:45:13 1997 Path: news.isc.org!bounce-back From: jjd@primenet.com (Jim Davis) Newsgroups: news.announce.newgroups,news.groups,sci.engr.safety Subject: RESULT: misc.industry.safety.personal moderated passes 241:16 Followup-To: news.groups Message-ID: <858130301.15431@isc.org> Supersedes: <857245616.28368@isc.org> Organization: Usenet Volunteer Votetakers, Ska Revival branch. Approved: newgroups-request@isc.org Archive-Name: misc.industry.safety.personal Date: Wed, 12 Mar 1997 01:31:42 GMT Lines: 354 Xref: news.isc.org news.announce.newgroups:165 RESULT moderated group misc.industry.safety.personal passes 241:16 There were 241 YES votes and 16 NO votes, for a total of 257 valid votes. There was 1 invalid ballot. For group passage, YES votes must be at least 2/3 of all valid (YES and NO) votes. There also must be at least 100 more YES votes than NO votes. There is a five day discussion period after these results are posted. If no serious allegations of voting irregularities are raised, the moderator of news.announce.newgroups will create the group shortly thereafter. misc.industry.safety.personal passed on Tue Feb 25 02:11:46 1997. Newsgroup line: misc.industry.safety.personal Personal protective equipment. (Moderated) This vote was conducted by a neutral third party. Direct questions about the proposed group to the proponent. Proponent: Paul Clarke Votetaker: Jim Davis RATIONALE: misc.industry.safety.personal At present there is no newsgroup dedicated to the personal protective equipment (ppe) industry. This new group will provide the opportunity for interested parties (as set out in the charter) to discuss matters of mutual interest. Existing fora for ppe - eg National, Regional and International standards bodies, manufacturers' associations etc - do not facilitate discussions over a broad front. They are usually confined to, respectively - consideration of the product standards or manufacturer (only) interests. This newsgroup will enable discussions over a much wider range of topics. Furthermore, relevant Regional product standards - eg European, American, Australian / New Zealand - currently differ. It is to be hoped that world-wide discussion between group members may act as an informal catalyst to bring together these differing standards in the future, as well as providing the forum for useful dialogue in the meantime. It is intended to maintain only one main group, and not to divide it into sub-groups specialising in particular topics. In this way, the maximum cross fertilisation of ideas will be maintained. CHARTER: misc.industry.safety.personal For discussion of all aspects of personal protective equipment (ppe), defined as any device(s) worn or held by the user in order to provide him (her) protection whilst performing the given task. It is open especially, but not exclusively, to manufacturers, distributors, testing and certifying organisations, government departments, safety officers and users of ppe, including professional associations of the foregoing. Advertising of products and services directly related to ppe is allowed, but is limited to 50 words of text in any posting, plus references to contact details, addresses, websites etc. Binaries are not permitted. The group will be moderated, in order to prevent articles not conforming to the charter from being posted. END CHARTER. MODERATOR INFO: misc.industry.safety.personal Moderator: Paul Clarke Administrative contact address: inspec@zetnet.co.uk Article submission address: inspec@zetnet.co.uk Paul Clarke is a chartered mechanical engineer, 49 years old and living in England. He has been involved with the ppe industry for 22 years. END MODERATOR INFO. misc.industry.safety.personal Final Vote Ack Voted Yes ------------------------------------------------------------------------------ 100412.2636@CompuServe.COM Mike Denton 102431.2532@CompuServe.COM ocenco 105333.3460@CompuServe.COM Dave Barber 106174.64@compuserve.com David Hughes 106333.610@compuserve.com Adrian Lyszkowski 1136CARI@s1.cise.it Aurora Francisca CARIDI 73142.2143@CompuServe.COM elliott berger 76256.1522@CompuServe.COM Lee Hager ab73@gtnet.gov.uk Malcolm Fendick AHenry2026@aol.com ajgsagar@bttg.co.uk AJGSagar akj@brondby.force.dk Arne O. Kleinert Jensen Alan_Bailey_at_HSL-BL-SHEFFIELD@rlsd.demon.co.uk albehar@ns.orbonline.net Alberto Behar albers@pml.tno.nl Albers alogica@ms4.hinet.net amrocca@dcta.demon.co.uk Anne-Marie Rocca Anna-Maija.Hamalainen@occuphealth.fi Anneli.Tuomainen@occuphealth.fi Anneli Tuomainen ANNELI@KIHOPTIKK.HIBU.NO Anneli Demberg arielle@taronga.com Stephanie da Silva aunteeks@ix.netcom.com Chuck austins@satra.co.uk azit@occuphealth.fi Antti Zitting Barrie_Bancroft_at_HSL-BL-SHEFFIELD@rlsd.demon.co.uk Baynon@acsu.buffalo.edu Baynon bengt.johansson@arbsky.se betseyk@coil.com Betsey BIA@compuserve.com BIA MEFFERT Bjorn-Arne.Johnsen@ffi.no bobmcc@tcsi.com Bob McCormick bokhoven@pml.tno.nl Bokhoven brian.rudge@natpower.com Brian Rudge c23st@eng.delcoelect.com Spiros Triantafyllopoulos CARTEL@mbox.vol.it CARTEL Catherine.Bassey@bsi.BSI.btx400.co.uk Catherine Bassey cert@zetnet.co.uk Inspec Cert cfynn@sahaja.demon.co.uk Christopher Fynn chalfen@TurboNet.com Chuck Halfen chrism@ccohs.ca Chris Moore Cirederf@aol.com Craig_Schroll@compuserve.com Craig Schroll crleech@freenet.carleton.ca Colin R. Leech cstar@uxmail.ust.hk Cho Sing cWatson@helmets.co.uk D.Bromwich@plato.ens.gu.edu.au David Bromwich d.moodie@uws.EDU.AU Debra Moodie dansol@ix.netcom.com Daniel Solitz daple@ciop.waw.pl Dariusz Pleban darrenr@satra.co.uk darussell@dcta.demon.co.uk Derrick Russell DASROTE@aol.com daveg@fox.nstn.ca David Gibson david@winterburn.nildram.co.uk David Winterburn David_Brearley_at_HSL-BUXTON@rlsd.demon.co.uk dbadger@acutech-consulting.com Deborah Badger dcongalton@dcta.demon.co.uk David Congalton djcarr@dcta.demon.co.uk Debbie Carr dljohnsn@rt66.com Daniel L. Johnson DMoulton@vconnhse.telstra.com.au Moulton, David Don877@aol.com dpi@uni.net D.P.I. Srl dpisaniello@medicine.adelaide.edu.au Dino Pisaniello ebehr@internode.net Eve M. Behr echessor@msmail.wcb.bc.ca Ed Chessor WCB of BC Eero.Korhonen@occuphealth.fi EKASTU@aol.com ekb@brondby.force.dk erik bjarnov erma@occuphealth.fi Erja Makela Ernst.Sutter@ptb.de Ernst Sutter euthke@siam.muc.de Ekkehard Uthke francoeur@gzea.com Dennis Francoeur fristrom@ume.foa.se Magdalena Fristroem G.Kerry@acoustics.salford.ac.uk gbostock@mmm.com gerges@mbox1.ufsc.br gerges gmosk@ncia.net George Moskevitz goodin_darius@CCMAIL.ncsc.navy.mil Goodin_Darius Grevillius_Ulf@tind.trelleborg.com H.Falkenberg@gcal.ac.uk Helle Kristine Falkenberg Harkness_Ira@CCMAIL.ncsc.navy.mil Harkness_Ira Hayden.Pugh@aeat.co.uk Hayden Pugh hclewis@dcta.demon.co.uk Hermione Lewis HEADPRO@aol.com Heiko.Rinck@gkss.de Rinck Helena.Makinen@occuphealth.fi hosklam@smtpgwy.polyu.edu.hk howen@PO2EP.EP.OCTEL.btX400.co.uk Hugh Owen icctech@idirect.com Barbara Foster iggy@jps.net iggy iholmer@niwl.se Ingvar =?iso-8859-1?Q?Holm=E9r?= ingemar.blomberg@stg.se ingrid.tornlund@stockholm.mail.telia.com Ingrid Tornlund inspec@zetnet.co.uk Paul Clarke inspect@ksc15.th.com Ross McKay intercast@intercast.it INTERCAST EUROPE S.p.a. iotti@inrs.fr Jean Marie IOTTI IRENE@KIHOPTIKK.HIBU.NO Irene Eieland j.quinn@unsw.edu.au Julie Quinn jacquesm@inrs.fr JACQUES Michel JANET.LESLIE@SAA.sa.telememo.au Jan_Rudge@compuserve.com Jannette Rudge jcasali@vt.edu John G. Casali jeff.friar@hse.gov.uk jesp@intercable.net Jesus Eugenio Sanchez jfpu@peltor.se jimal@easynet.co.uk Jim Bolsover Jim_Rowland_at_HSL-BL-SHEFFIELD@rlsd.demon.co.uk jlm@jlm.po.my Administrator john.cain@hse.gov.uk jonas.frendin@sp.se Jonas Frendin Joseph.F.Miante@lmco.com Joe jpc@drum.msfc.nasa.gov J. Porter Clark jpimentel@nectech.com jpluzardo@redestb.es Jorge Perez luzardo jthewitt@mmm.com judgems@worldnet.att.net Michael Schoenfeld Jukka.Kallio@pt2.tempo.mol.fi Kallio Jukka Jyrki.Liesivuori@occuphealth.fi K.Black@mst.csiro.au kaayk@pml.tno.nl kaayk kahuna@panix.com Andy Finkenstadt kaner@satra.co.uk kari.ekker@nts.no Kari Ekker keithh@satra.co.uk kenkur@turk.net Kenan Kurucuoglu kimdv@netcom.com Kim DeVaughn Kirsti.Taattola@occuphealth.fi kjell.mases@hornell-speedglas.se kraemer@uni-mainz.de Marcus Kraemer Kyosti.Louhelainen@occuphealth.fi labs@zetnet.co.uk Inspec Labs lars.ronner@lagan.srsafety.se Lars Ronner leeuw@pml.tno.nl Dr Matthijs W. Leeuw linbec@eos.net LLOYD.HILLMAN@SAA.sa.telememo.au LTCOL_robert_buckingham@chppm-ccmail.apgea.army.mil LtCol Robert Buckingham magne.helland@hibu.no Magne Helland majed@ciop.waw.pl Malgorzata Jedrzejewska maj_theresa_schulz@chppm-ccmail.apgea.army.mil Maj Theresa Schulz malcolmp@satra.co.uk Marita.Luotamo@occuphealth.fi Marita Luotamo markus.rueedi@empa.ch Rueedi Markus mauge@csv.warwick.ac.uk Jacko, last time I checked MAUGP@csv.warwick.ac.uk Stuart Denton mayer@inrs.fr Alain Mayer mellerj@westminster.ac.uk JOHN MELLERIO, BHS, UoW mformsto@PO2EP.EP.OCTEL.btX400.co.uk Martin Formstone mham@occuphealth.fi Mervi Hameila mhatz@raven.phs.com Mike Hatz mholyoak@PO2EP.EP.OCTEL.btX400.co.uk Melanie Holyoak MichaelBarrett@compuserve.com Barrett mike.clayton@rlsd.demon.co.uk mike clayton mike@prolaser.demon.co.uk mike green mikecook@pipeline.com Michael D. Cook Mikko.Hirvonen@occuphealth.fi mjp@apvalves.avel.co.uk Martin Parker mjwc@cguaplo.cgu.edu.tw Ming J. W. Chang MLSIEG@monsanto.com MSAPIR@etuh.lrt.be Sapir, Marc N.J.Mills@bham.ac.uk nbk9@NIOSH5.EM.CDC.GOV Kyriazi, Nicholas . ndavid@tiac.net ndavid nerg_man@ix.netcom.com Nick_Vaughan_at_HSL-BL-SHEFFIELD@rlsd.demon.co.uk Nystroem_Ulf@tind.trelleborg.com Odd.Busmundrud@ffi.no omics@nbnet.nb.ca omics P.D.Wheeler@acoustics.salford.ac.uk Pasi.Mielonen@occuphealth.fi Pau@hamburg.germanlloyd.de Harald Pauli paul.evans@hse.gov.uk paulh@crowcon.com Paul Honigmann PaulRR@msn.com Paul Rabin paxil@cancom.net Trevor Pekka.Olkinuora@occuphealth.fi pernille.flam@smp.sp.se Pernille Flam PETTETTROD@aol.com pgj@ume.foa.se Per-Gunnar Joensson pmalloy@PO2EP.EP.OCTEL.btX400.co.uk Paul Malloy pturnbul@PO2EP.EP.OCTEL.btX400.co.uk Phil Turnbull qlakes@ms8.hinet.net James Chen Raoul.Gronqvist@occuphealth.fi Rauno.Paakkonen@occuphealth.fi =?ISO-8859-1?Q?Rauno_P=E4=E4kk=F6nen?= raweber@mmm.com Ray.Chin@bsi.BSI.btx400.co.uk Ray Chin rboccard@usb.ve Renzo Boccardo rene.rossi@empa.ch Rossi Rene respro@easynet.co.uk harry cole rfraser@destination.ca Robert Fraser rgitfb@rgit-ltd.rgu.ac.uk Fiona Boyle rgitsbs@rgit-ltd.rgu.ac.uk Simon Bennett-Smith richsong@vcn.bc.ca Richard Songhurst rick.stickle@gsfc.nasa.gov Rick Stickle Riitta.Riala@occuphealth.fi Ritva.Degerth@occuphealth.fi ROBERT.WILKES@SAA.sa.telememo.au roberto@eurocontrol.fr Ollivier Robert robinb@satra.co.uk robwales.demon.co.uk@robwales.demon.co.uk Mat Roberts ronnie.grant@mogur.com Ronnie Grant rosmanha@pinkinc.com H. A. Rosman rpedley@PO1EP.EP.OCTEL.btX400.co.uk Bob Pedley RWTennant@msn.com Richard Tennant S.Bermingham@uws.EDU.AU Sharron Bermingham s.dain@unsw.edu.au Stephen Dain s.reed@uws.edu.au Sue Reed safemac@netnitco.net Allan McLean safety@lava.net April seaton@msmail.wcb.bc.ca Stuart Eaton, WCB of BC shag@emanon.net Dan Birchall shimeall@cs.nps.navy.mil Timothy Shimeall siegfried.derler@empa.ch Derler Siegfried sn@ds.dk splash@cport.com Caren Teigen stamper@stamper.com Chris Stamper Steven.vanderMinne@nni.nl Steven van der Minne Stig.Hakansson@kov.se stuck@laser.brooks.af.mil Bruce Stuck sveingp@online.no Paulsen T.I.Hempstock@acoustics.salford.ac.uk tessierp@macom.com Phil Tessier TF.anne@occuphealth.fi thomas.martinsson@sordin.se THOMAS MARTINSSON thorpsten@ume.foa.se Jerker Thorpsten Timo.Tuomi@occuphealth.fi tlawson@amug.org Todd C. Lawson Tom_Pochylski@smtp.svl.trw.com Tom Pochylski transgg@satlink.com Constancio Eduardo ECHEVARRIA tssafety@one.net Tuija.Hyvarinen@occuphealth.fi Tuomo.Eskelinen@occuphealth.fi VingVen@aol.com VVERDE@etuh.lrt.be Verde, Vicente wambaumr@apci.com Mike Wambaugh WHITIRN@DHFS.STATE.WI.US Roger Whiting WPatrick@cencoast.com Patrick, Whit wqsafty@sna.com John Edmunds wyllieck@mcmail.CIS.McMaster.CA Craig Wyllie Yrjo.Peltonen@occuphealth.fi Yrjo Peltonen ZS.Jackisch@t-online.de ZS.Jackisch@t-online.de Voted No ------------------------------------------------------------------------------ afabbro@brokenarrow.us.itd.umich.edu Andrew Fabbro bjv@herbison.com B.J. Herbison bonine@interaccess.com Steve Bonine booda@datasync.com Martin H. Booda egbert@garfy.ehinzen.com Egbert Hinzen gpr96002@uconnvm.uconn.edu G.P. Ryan harri.johansson@hpy.fi Harri Johansson jlowther@pwa.acusd.edu John Lowther john1@world.std.com Fred Cherry marquez@pacbell.net Aaron Marquez patl@lcs.mit.edu Patrick J. LoPresti ramana@ecf.toronto.edu Ganapathiraju Sree Ramana Gopal rick@bcm.tmc.edu Richard H. Miller schwarz@physik.tu-berlin.de Georg Schwarz stainles@bga.com Dwight Brown stella@magenta.com STella Votes in error ------------------------------------------------------------------------------ postmaster@royle.abel.co.uk Heather Royle ! Invalid address